TilingPlastering and renderingFloor levelingFinishingPrimersOther adhesivesWaterproofing and repairingTile GroutsUnmodified mixes
rus  |  eng
 
 

Base preparation

The base under a finish should be smooth, cleared of a dust and dirt. Seams should be cleared of tiled glue right after tile packing. The finish of seams can be begun not earlier than in 24 hours after tile packing.

Mixing of mortar

Dry mix to pour out in capacity with pure water in the ratio 0,3 - 0,32 l of water on 1 kg of a dry mix and carefully to mix manual or mechanically before reception homogeneous creamy masses. A ready solution to sustain during 3 - 5 minutes and mix again. Prepared finish solution is recommended to be used within 2 hours since the moment of mixing.

Application

Apply ready mortar with a solution diagonal movements deeply and densely to fill seams by means of a grater or rubber palette knife. After that a tile surface to clear with a damp firm sponge. After firming (in 2 days) execute definitive clearing of a surface of tiles by a dry cotton fabric. Air and basis temperature should be from +5 ° to +30 °. The ready surface does not demand the subsequent processing by impregnation for mortar seams.

 
Consultation on the pplication materials

FUGA

  

It is made of white cement. It is applied to filling of seams between a wall and floor ceramic, tiled, mosaic tile, and also marble slabs in dry, damp and wet premises inside and outside of buildings. Width of seams from 2 to 6 mm. Elastic, strong, easy in work, water-and cold-resistant, the raised whiteness! At drying-out does not form cracks, bears against tile edges, smooth and homogenious, does not contain firm extraneous matters, possess high adhesive ability!

 
 

Technical characteristics

Mixing proportion: 1l of water
On 1 kg of a mix0,3 0,32
The consumption at width of a seam of 3 mm, on 1 sq. m1,5 kg
Viability of a solution2 hours
Hardening time24 hours
Temperature of works and the baseFrom +5 to +30
Durability on compression10 MPa
Adhesive strength0,5 MPa
Frost resistance35 cycles
Packaging2 & 5 kg Kraft-bags
 
Packaging and storage
The dry mix for mortar is delivered in 2 kg and 5kg craft-bags. A storage warranty period in a dry premise in container of the manufacturer is 6 months from the date of the manufacturing, specified on packing.
The consumption
The average consumption 0,5 dry mixes on 1 m. of a sq. surface at width of a seam of 3 mm and depth of 4 mm. Practically the consumption depends on the size of an applied tile, actual width and depth of seams.
 
Home Search and map
Rambler's Top100
Site development —
the Internet-agency «Webstroy»