TilingPlastering and renderingFloor levelingFinishingPrimersOther adhesivesWaterproofing and repairingTile GroutsUnmodified mixes
rus  |  eng
 

Base preparation

   The basis must be dry, solid, cleaned from dust, mud, oil, remains of chalk and lime mixtures or paint. Prior to plastering, the basis must be treated with IVSIL OSNOVA primer, or IVSIL BASIS-BETON primer, if the basis is made of concrete or others solid, non-absorbing surfaces (big size silicate bricks with smooth surface, of ceramic bricks). Strongly absorbing bases (gaze and foam concrete, gipsum plaster, anhydrite) should be primed with IVSIL GLUBOKOGO PRONIKNOVENIYA (primer penetrator).

   If the curvature of the walls and there are deviations from the verticaevelling, levelling of walls is made with the help of installed markers.

   Required temperature of air and basis is from +5C to +30C.

Mixing of mortar

   Dry plaster mix is poured into a mixing bucket with clean water in proportion of 1 kg of dry mix per 0,45-0,5 l of water, then thoroughly stirred manually or with the help of mixing drill, until homogeneous, elastic mixture without any lumps or clots is received. The mixture is left for 5 minutes and then stirred again. Prepared plaster mixture should be used within 1 hour.

Application

   Ready plaster mixture is applied with the help of plaster trowel to the surface in a layer of 5 to 20 mm and initially levelled and squared with a stick. If the surface is being prepared for painting, after plaster mixture starts to set (in 1 hour after final levelling) the surface should be wet with water and smoothed by a plasterers trowel or a plasterers float.

   If necessary, levelling can be done in several layers. In this case the first layer of plaster should be roughed («combed» with a plastering comb in the form of a swallow tail) and then let to dry for 1 day.

 
Consultation on the pplication materials

RUST

  

   Gypsum plaster (dry gypsum plaster mix) IVSIL RUST is based on gypsum bonding component and contains light filler and polymer additives.

   Upgraded recipe from December 2009!

   Light grey gypsum plaster is suitable for manual plastering of walls and ceilings made of concrete, any type of bricks, stone, plasterboards or gypsum-fibre boards. This plaster is also easily applied to light porous materials: aerated blocks, foam blocks, ceramsit blocks, gas-silicate and gas concrete blocks, walls made of foam concrete, aerated concrete and ceramsit concrete.

   This plaster is used for wall and ceiling levelling inside premises with normal humidity level. As it is based on the natural ecologically clean material – gypsum, it is recommended for use in accommodation premises. This plaster is easy to mix, apply and spread as a layer of 30 mm in one go. The minimum layer of gypsum plaster should not be less than 5 mm. Gypsum plaster RUST is of high elasticity, strong and has a high level of adhesion, which makes it an excellent reliable basis for further application of decorative materials. Whilst drying, it does not crack.

   Finishing gypsum plaster is easy to spread and to level in order to form an even, glossy surface for further painting or covering with wallpaper. The surface treated with this plaster does not need any other finishing-off treatment. The basic price of gypsum plaster IVSIL RUST for Moscow and Moscow region is 245 roubles/30 kg. You can see prices of other plaster mixes in the section «Price List».

   See also: gypsum plaster for machine application IVSIL RUST-M, white gypsum plaster IVSIL SPARK.

   Dry IVSIL plaster mixes: Gypsum plaster IVSIL RUST, plaster for walls and ceilings for interior jobs, humidity resistant gypsum finishing-off plaster.

 
 

Technical characteristics

Mixing proportion: 1l of water
On 1 kg of a mix0,45 0,5 l
On 30 kg of a mix13,5-15,0 l
The consumption at a thickness of a layer of 1 mm, on 1 sq. m0,9 1,1 kg
Thickness of a layer of a solution, mm5 30 mm
Viability of a solution1 hour
Achievement of full durability7 days
Temperature of works and the baseFrom +5 to +30
Durability on compression5 MPa
Adhesive strength0,5 MPa
Packaging30 kg bag
Colorgrey
 
Packaging and storage
The dry plaster mix is delivered in Craft-bags 30 kg. A storage warranty period is 6 months from the date of the manufacturing.
The consumption
The average consumption 9-11 kg of a dry mix on 1 m. of a sq. surface at a thickness of a layer of a solution 10 mm. The exact consumption depends on degree of flatness (relief) of the basis.
 
Home Search and map
Rambler's Top100
Site development —
the Internet-agency «Webstroy»