TilingPlastering and renderingFloor levelingFinishingPrimersOther adhesivesWaterproofing and repairingTile GroutsUnmodified mixes
rus  |  eng
 
 

Base preparation

   The basis must be dry, solid, cleaned from dust, mud, oil, remains of chalk and lime mixtures or paint. Prior to plastering, the basis must be treated with IVSIL OSNOVA primer, or IVSIL BASIS-BETON primer, if the basis is made of concrete or others solid, non-absorbing surfaces (big size silicate bricks with smooth surface, of ceramic bricks). Strongly absorbing bases (gaze and foam concrete, gipsum plaster, anhydrite) should be primed with IVSIL GLUBOKOGO PRONIKNOVENIYA (primer penetrator).

   Required temperature of air and basis is from +5C to +30C.

 

Mixing of mortar

   Pour dry mix into a machine and set up water feed according to the required consistence of mixture.

 

Application

   Ready mixture is applied by spraying, in one layer. Then the surface is smoothed. After the beginning of setting, the surface should be wet and polished with a sponge, then finally smoothed by a metal float. If necessary, the next layer is applied after the first layer is set, without smoothing the first layer.

 
Consultation on the pplication materials

RUST-M

  

   Gypsum plaster for machine application IVSIL RUST-M with light filler and polymer additives. It is designed for wall and ceiling plastering, application made by using any types of plastering machines.

    This plaster is used for interior jobs in premises with normal level of humidity. It can be applied to concrete, aerated concrete, bricks, foam concrete, stone and plastered surfaces. It is easy for use and can be applied, spread and smoothed up to a glossy even surface, suitable for further painting or wallpaper gluing without extra treatment by other products. It is characterised by high elasticity and adhesion.

   Please be aware, that when you buy 500 ton of IVSIL RUST-M gypsum plaster within 6 months, you will receive a free KALETA plaster station!

   See also: gypsum plaster IVSIL RUST for manual application, or go to the section all IVSIL Plasters.

   Plastering: gypsum plaster for machine application IVSIL RUST-M.

 
 

Technical characteristics

Mixing proportion: 1l of water
On 1 T of a mix500 600 l of water
The consumption at a thickness of a layer of 10 mm, on 1 sq. m9 11kg
Thickness of a layer of a solution, mm5 - 50 mm
Viability of a solution2 - 3 hour
Achievement of full durability7 days
Temperature of works and the baseFrom +5 to +30
Durability on compression5 MPa
Adhesive strength0,5 MPa
Packaging30 kg
ColorGrey
Beginning catching time not earlier than3 hours
 
Packaging and storage
The dry mix is delivered in kraft-bags of 30 kg. A storage warranty period is 6 months from the date of the manufacturing.
The consumption
The average consumption is 9-11 kg of a dry mix on 1 m. of a sq. surface at a thickness of a layer of a solution 10 mm.
 
Home Search and map
Rambler's Top100
Site development —
the Internet-agency «Webstroy»