TilingPlastering and renderingFloor levelingFinishingPrimersOther adhesivesWaterproofing and repairingTile GroutsUnmodified mixes
rus  |  eng
 

Base preparation

   The surface for decorative plaster application must be solid, cleaned from dust, mud, oil, fats, lime, wax, chalk or lime mixtures, oil or emulsion paints. Prior to plastering, the basis must be treated with IVSIL BAZOVAYA (Base) primer. Strongly absorbing bases (gaze and foam concrete, gipsum plaster, anhydrite) should be primed with IVSIL GLUBOKOGO PRONIKNOVENIYA (primer penetrator) and pre-aligned by one of facade reparing plasters IVSIL (GROSS or THINER).

   Unevenness of a walls, a crack, and a recess should be also pre-aligned.

Mixing of mortar

   Dry mix is poured into a mixing bucket with clean water in proportion of 20 kg of dry mix per 6 - 6,5 l of water, then thoroughly stirred manually or with the help of mixing drill for approx. 2 minute, until homogeneous, elastic mixture without any lumps or clots is received. The mixture is left for 5-10 minutes and then stirred again.

   Prepared mix should be used within 2 - 2,5 hours.

Application

   Ready mixture is applied on prepared surface with a steel trowel to form a layer of 0,5 to 8 mm. A small steel trowel (30 cm) is used for partial levelling, and a two-handed trowel for whole levelling.

   If necessary, several layers can be applied, providing every previous layer has already dried (in 2-3 days). The basis and air temperature should be +5ºC to +30ºC. Dried layer should be polished with a fine abrasive material (thin sand paper).

 
Consultation on the pplication materials

FASADNAYA

  

   White cement based IVSIL FACADE finishing plaster mix is made of imported white cement, mineral filler and polymer additives. This facade finishing plaster is designed for levelling walls and ceilings made of concrete or bricks, it is suitable for fine quality finishing of cement plastered walls and ceilings prior to further application of paint or any other decorative cover inside dry or wet premises or for building facade jobs. It has high level of elasticity. Easy to polish for creating a smooth even surface. After being polished it is solid, does not crumble or get off the surface. Due to its high level of adhesion it is ideal for thin interior wall levelling under heavy wallpaper.

   Being water resistant and frost resistant cement IVSIL FACADE is recommended for exterior jobs on building facade in any climatic zone, including those with sharp temperature changes and high level of precipitation. The basic price of IVSIL FINISHNAYA is 290 roubles/20 kg. To see prices of other IVSIL putties and finish plasters, please visit the section Price List.

See also: facade plaster IVSIL GROSS, humidity resistant cement-based finish IVSIL BAZOVAYA or go back to IVSIL Finishing section.

   IVSIL finishing plasters: Facade finish for exterior jobs, frost resistant cement finishing plaster IVSIL FASADNAYA.

 
 

Technical characteristics

Mixing proportion: 1l of water
On 1 kg of a mix0,3 0,35
On 20 kg of a mix6 7
The consumption at a thickness of a layer of 1 mm, on 1 sq. m0,9 1kg
Viability of a solution2 2,5h
PackagingA bag of 20 kg
 
 
Home Search and map
Rambler's Top100
Site development —
the Internet-agency «Webstroy»