TilingPlastering and renderingFloor levelingFinishingPrimersOther adhesivesWaterproofing and repairingTile GroutsUnmodified mixes
rus  |  eng

Base preparation

   The surface for plaster application must be solid, cleaned from dust, mud, oil, fats, lime, wax, chalk or lime mixtures, oil or emulsion paints. Prior to plastering, the basis must be treated with IVSIL OSNOVA primer. Strongly absorbing bases (gaze and foam concrete, gipsum plaster, anhydrite) should be primed with IVSIL GLUBOKOGO PRONIKNOVENIYA (primer penetrator) and pre-aligned by one of repair plasters IVSIL.

   Unevenness of a walls, a crack, and a recess should be also pre-aligned.

Mixing of mortar

   Dry mix is poured into a mixing bucket with clean water in proportion of 20 kg of dry mix per 6 - 6,5 l of water, then thoroughly stirred manually or with the help of mixing drill for approx. 2 minute, until homogeneous, elastic mixture without any lumps or clots is received. The mixture is left for 5-10 minutes and then stirred again.

   Prepared mix should be used within 2 hours.


   Ready mixture is applied on prepared surface with a metal trowel to form a layer of 0,5 to 8 mm. A small steel trowel (30 cm) is used for partial levelling, and a two-handed trowel for whole levelling. 

   If necessary, several layers can be applied, providing every previous layer has already dried (in 2-3 days). The basis and air temperature should be +5ºC to +30ºC. Dried layer should be polished with a fine abrasive material.

Consultation on the pplication materials



   IVSIL finishing plaster for indoor walls and ceilings in wet and dry conditions BAZOVAYA (Base) is based on white cement with mineral filler and polymer additives. It is for finishing of walls and ceilings made of concrete, plastered basis inside buildings. Humidity resistant and water resistant cement based plaster is suitable for dry and wet premises, including bathrooms and basements. It is also recommended as economic thin putty under wallpaper.

   IVSIL Base is easy to apply and has high level of elasticity. It is easy to polish up to perfectly smooth surface for further application of paint or wallpaper. Retail price of IVSIL BASE cement humidity resistant finishing plaser is 220-235 roubles/20 kg. You can find prices of other IVSIL stucco/plasters in the section Price list.

See also: frost resistant finish for exteriors IVSIL FACADE, polymer-based finish coat IVSIL GREENTEX or go back to the section IVSIL Finishing.

   IVSIL dry finishing mixes: humidity resistant IVSIL BAZOVAYA (Base) for interior jobs, cement-based finish for bathrooms.


Technical characteristics

Mixing proportion: 1l of water
On 1 kg of a mix0,3 0,35
On 25 kg of a mix6,0 7,0
The consumption at a thickness of a layer of 1 mm, on 1 sq. m0,9 1kg
Viability of a solution2 2,5h
Hardening time24 hours
Achievement of full durability28 days
Packaging20 kg
Filling material fraction, not more than0,1 mm
Home Search and map
Rambler's Top100
Site development —
the Internet-agency «Webstroy»