TilingPlastering and renderingFloor levelingFinishingPrimersOther adhesivesWaterproofing and repairingTile GroutsUnmodified mixes
rus  |  eng
 
 

Base preparation

   The base surface should be strong, carefully cleared of dust, dirt, oils, and greases. Unstable and fragile parts of the base must be removed.

Mixing of mortar

   Shake well before use.

Application

   The primer is applied in even, continuous layer by a brush, roller or a spray gun. It is recommended to apply two layers to the surfaces with high level of absorption. Second layer is applied after drying the previous (approx. 30-40 minutes). The temperature of the basis must be not less than +5ºC.

 
Consultation on the pplication materials

BAZOVAYA

  

   Multipurpose primer for walls, facade and ceiling IVSIL BAZOVAYA (Base) is an ecologically clean water dispersion of polymer with special additives. Latex primer for preparation, strengthening of the basis, improvement of adhesion to the basis for further application of tiles, plaster, putty, wallpaper, paint, etc.), before to do tiling or any other decorating jobs.

   Fast drying primer makes the surface harder, levels uneven absorption ability of the surface and produce anti- bacterial and anti-dust effect, decrease the amount of decorative materials used over it, protect the surface from humidity.

   IVSIL BASE is also used for priming of plasterboards and walls before adhesion of wallpaper. When it is used in combination with wallpaper adhesive, it prepares the surface, decreases the use of wallpaper adhesive and allows to easily correct position of wallpaper during application. This primer can be used for treatments of walls before adhesion of heavy wallpapers on vinyl and fliselyne basis. It is suitable for interior and exterior jobs.

   In Moscow IVSIL BASE retails price is 240-255 roubles/10L. To find the prices of other IVSIL primers, please visit the section Price List.

See also: primer for self-levelling floors, screeds and floor levelling mixes IVSIL TIE-ROD or go to the section all IVSIL primers.

   IVSIL construction materials and mixtures: multipurpose primer for exterior and interior jobs IVSIL BASE, rapid-drying facade primer.

 
 

Technical characteristics

Temperature of works and the baseFrom +5 to +30
Packaging10 l
Drying-out time30 min
Consumption on 1sq.m160 200 ml
 
Packaging and storage
The primer is delivered in plastic canisters of 10 l. A storage warranty period is 6 months from the date of the manufacturing. Prevent freezing of primer during storage and transportation.
The consumption
Average consumption of one layer is 160 200 ml on 1 sq. m of a surface. The exact consumption depends of flatness (relief) of the basis.
 
Home Search and map
Rambler's Top100
Site development —
the Internet-agency «Webstroy»