TilingPlastering and renderingFloor levelingFinishingPrimersOther adhesivesWaterproofing and repairingTile GroutsUnmodified mixes
rus  |  eng

Base preparation

   The base surface should be strong, carefully cleared of dust, dirt, oils, and greases. Unstable and fragile parts of the base must be removed.


Mixing of mortar

   Shake well before use.


   The primer is applied in even, continuous layer by a brush, roller or a spray gun. If necessary, application can be done in two layers. In this case the second layer is applied after drying the previous (approx. 30-40 minutes). The temperature of the basis must be not less than +5ºC.

Consultation on the pplication materials



   Special primer for floor, screed and floor levelling IVSIL TIE-ROD. Primer for concrete floors, cement screeds, levelling mixes and self-levelling floors, ecologically clean water dispersion of polymer with additives. Can be used as multipurpose primer for walls.

   The main function of IVSIL TIE-ROD primer - to balance absorption levels of the basis, to prevent quick absorption of moisture from the levelling mixture in order to provide even hardening of the floor levelling mixtures.

   Floor primer IVSIL TIE-ROD provides anti-septic effect, decrease amount of materials for flooring jobs, screed and levelling. It keeps dust down and guarantees better bonding. IVSIL primer is recommended for use for all types of IVSIL floor levelling compounds.

   The basic price for primer IVSIL TIE-ROD is 265 roubles/10L. To find prices of other IVSIL primers please see the section Price List.   

   See also: the section flooring, screeds and floor levelling IVSIL mixes, other IVSIL primers.

   Floor primer IVSIL TIE-ROD, primer for screed, for self levelling floors and floor levelling mixtures.


Technical characteristics

Temperature of works and the baseFrom +5 to +30
Packaging10 l canister
Drying-out time30 min
Consumption on 1sq.m175 200 ml
Packaging and storage
The primer is delivered in plastic canisters of 10 l. A storage warranty period is 6 months from the date of the manufacturing. Prevent freezing of primer during storage and transportation.
The consumption
Average consumption of one layer is 175 200 ml on 1 sq. m of a surface. The exact consumption depends of flatness (relief) of the basis.
Home Search and map
Rambler's Top100
Site development —
the Internet-agency «Webstroy»