TilingPlastering and renderingFloor levelingFinishingPrimersOther adhesivesWaterproofing and repairingTile GroutsUnmodified mixes
rus  |  eng
 

Base preparation

   The base surface should be strong, carefully cleared of dust, dirt, oils, and greases. Unstable and fragile parts of the base must be removed.

Mixing of mortar

   Shake well before use.

Application

   The primer is applied in even, continuous layer by a brush, roller or a spray gun. It is recommended to apply two layers to the surfaces with high level of absorption. 2-nd layer is applied after drying the previous (approximately 30-40 minutes). The temperature of the basis must be not less than +5ºC.

 
Consultation on the pplication materials

OSNOVA

  

   IVSIL OSNOVA is a primer suitable for walls and ceilings. It is a latex primer with special additives for preparation of surfaces and improving adhesion of different types of bases for further application of different construction materials (paint, plaster, putty, tiles, wallpaper, etc.).

   This primer has an antibacterial effect, decreases the amount of further applied materials, has anti-dust effect, prevents fast absorption of moisture, ensures even application and drying of construction materials. Application of this primer improves contact of wallpaper adhesive with the surface of the wall, makes it easier to correct wallpaper position in the process of adhesion.

   It is used as a primer for gypsum-plasterboards, brickwork, cement, gypsum basis and it is suitable for interior jobs. In Moscow retail price of IVSIL OSNOVA is 230-240 roubles/10L. To find prices of other IVSIL primers, please visit the section Price list.

   See also: multipurpose primer for interior and exterior jobs IVSIL BAZOVAYA (Base) or go to the section IVSIL primers.

   Rapid-drying primer for interior walls and ceiling IVSIL OSNOVA.

 
 

Technical characteristics

Hardening time30 min
Temperature of works and the baseFrom +5 to +30
Packaging10 l
Drying-out time30 min
Consumption on 1sq.m160-200 ml
 
Packaging and storage
The primer is delivered in plastic canisters of 10 l. A storage warranty period is 6 months from the date of the manufacturing. Prevent freezing of primer during storage and transportation.
The consumption
Average consumption of one layer is 160 200 ml on 1 sq. m of a surface. The exact consumption depends of flatness (relief) of the basis.
 
Home Search and map
Rambler's Top100
Site development —
the Internet-agency «Webstroy»